Non-dry Burning PTC Over The Side Industrial Electric Immersion
Heater
PTC Electric Immersion Heater
LONG ELEMENT LIFE:
• Patented PTC heater element lasts longer than conventional
heaters.
• Will not burn out if run in air.
• Will not burn out due to scale or sludge buildup.
SAFE DESIGN:
• Heater self limits its maximum operating temperature to 482F (250
degree C). This is lower than the ignition point of most plastics.
• Will not melt tanks when a 1/2" (12mm) minimum distance is
maintained.
• Overtemperature protection devices are not required.
• Safety is built-in, not added on.
• Metal-grounded construction (earth ground).
• Non-floating construction.
SIZES: 1,000 watts (1kW) to 6,000 watts (6kW).
VOLTAGES:
Three voltage ranges available: 120 volt, 200-240 volt, and 380-480
volt.
Heater is available in single or three phase power.
CORROSION RESISTANT HEADS: Vapor resistant, flame retardant polypropylene terminal
enclosures each with 3-foot (.9m) flexible PVC liquid tight
conduits.
OUTSTANDING PERFORMANCE:
• Watt densities of 26 watts per square inch (4 watts/cm2) ensure
long service life.
• Auto-stabilizing solid state element prevents hot spots and
ensures uniform heating.
• Heater derates itself in highly viscous and high temperature
solutions. Consult factory for sizing assistance.
CHEMICALLY RESISTANT:
For use in most aqueous alkaline, electroplating and rinse
solutions. Check our Solution Guide or with your chemical supplier
for recommended sheath material. Available in:
• 304 stainless steel
• 316 stainless steel
• Titanium
CERTIFICATIONS: ISO9001 and CE
Tube Diameter: 50mm(2-inch) standard
We have custom built heaters and can make any Watts,voltages with
the size according to customers’ requirement
OPTIONS :(consult Our FACTORY for any installation)
FAQ
Q: Where is Surplus located?
A: Our office located in HongKong,Dongguan and Shantou City.Our
factory located in Shenzhen.
Q: Can I buy direct?
A: Yes,you can buy from Surplus Directly.
Q: Do you manufacture your products in house?
A: Most of our products are manufactured in-house at our
factory.Some accessory items are not.
Q: Can I get the riser on my L-shaped aquaculture heater
longer/shorter?
A: Yes.There is no price difference for making a heater with a
middle riser,but there maybe a cost adder for a longer riser.
Q: What Third Party Approvals do your products carry(CE?)
A: Almost all of our products are CE compliant.
Q: How late can you ship?
A: Normally 7 days after comfirmed the order.
PACKING & SHIPPING
In our company,various packing methods are adopted according to
different product features,such as carton boxes,wooden case etc.For
electroplating plant equipment ,we can discuss it together and
choose the most suitable one.
As for shipment,different ways have their own advantage and
disadvantage:
By sea: the cheapest,suitable for large amounts,but take more time
By Air: faster, more convenient, expensive
By Express: more flexiable, door to door, expensive
RELATED SPECIES
 |  |  |
| PTFE IMMERSION HEATER | PTC IMMERSION HEATER | QUARTZ IMMERSION HEATER |
 |  |  |
| METAL HEAT EXCHANGERS | (PFA) HEAT EXCHANGERS | ANODE BASKET |
 |  |  |
| PP TANKS | PP BARRELS | PP BAG FILTERS |
OUR FACTORY
 |  |  |
| ENGINEER OFFICE | TOOLING DEPARTMENT | MACHING 1 |
 |  |  |
| MACHING 2 | MACHING 3 | MACHING 4 |
 |  |  |
Company Advantage
For more than ten years, our company has specialized in the
research and development and production of PCB and FPC
electroplating equipment, electric heaters, cold heat exchangers,
and coating on the surface of electroplating equipment. We have
collected advanced technologies and processes at home and abroad
for many years. With the practice and experience in the PCB
industry, the quality, stability and reliability of the products
are among the world's leading positions. Our company has passed
ISO9001: 2008 quality management system certification and CQC: CE
certification, is in line with the world, implements scientific
management, and implements international quality standards.
