Industrial Process PTFE Immersion Heaters & Flexible Heaters For
Wafer cleaning equipment
1. Fluoropolymer Sleeve Heating Element Quality resistance element
is sleeved in braided material for even coil separation. The entire
element is given an outer sleeving of pretested and pre-extruded
fluoropolymer tubing. THIS IS NOT A COATED PRODUCT.
2. Over-temperature Thermocouple The over-temperature cutoff device
protects the integrity of the fluoropolymer heater. If an opera-
tor should leave the heater on while draining or aspirating a tank,
when used in conjunction with a temperature control device, it will
automatically shut off the heater when it is exposed to air.
3. Designed for the most demanding chemical applications and to
provide years of trouble-free performance.
FEATURES
1. Constructed with our exclusive elements for extended service
life.
2. High efficiency in a compact design, and an excellent
alternative for replacing strip heaters on quartz tanks.
3. TFP for bottom heater applications and inside tank wall
requirements.
All wetted parts are fluoropolymer and compatible with virtually
any chemistry for unlimited process options.
(Not to be used with flammable solutions.)
4. Low watt density design promotes process temperature uniformity.
SPECIFICATIONS
1. From 2,000 - 36,000 watts
2. 120 to 600 volts, single or three phase
3. Up to 10 watts per square inch (1.5w/cm2)
4. Up to 130º Celsius (266° F). For higher temperatures, see
Options section.
5. OPTIONS AVAILABLE (CONSULT FACTORY)
.030 inch (0.76mm) thick sheath available for applications above
130°C (266° F) or for use with certain chemistries such as nitride
etch or HF
PID temperature control module
Custom configurations and lengths
Element gas purge flow regulator panel
Bolt down feature
FAQ
Q: Where is Surplus located?
A: Our office located in HongKong,Dongguan and Shantou City.Our
factory located in Shenzhen.
Q: Can I buy direct?
A: Yes,you can buy from Surplus Directly.
Q: Do you manufacture your products in house?
A: Most of our products are manufactured in-house at our
factory.Some accessory items are not.
Q: Can I get the riser on my L-shaped aquaculture heater
longer/shorter?
A: Yes.There is no price difference for making a heater with a
middle riser,but there maybe a cost adder for a longer riser.
Q: What Third Party Approvals do your products carry(CE?)
A: Almost all of our products are CE compliant.
Q: How late can you ship?
A: Normally 7 days after comfirmed the order.
PACKING & SHIPPING
In our company,various packing methods are adopted according to
different product features,such as carton boxes,wooden case etc.For
electroplating plant equipment ,we can discuss it together and
choose the most suitable one.
As for shipment,different ways have their own advantage and
disadvantage:
By sea: the cheapest,suitable for large amounts,but take more time
By Air: faster, more convenient, expensive
By Express: more flexiable, door to door, expensive
RELATED SPECIES
  |  |  |
| METAL IMMERSION HEATER | PTC IMMERSION HEATER | QUARTZ IMMERSION HEATER |
 |  |  |
| METAL HEAT EXCHANGERS | (PFA) HEAT EXCHANGERS | ANODE BASKET |
 |  |  |
| PP TANKS | PP BARRELS | PP BAG FILTERS |
OUR FACTORY
 |  |  |
| ENGINEER OFFICE | TOOLING DEPARTMENT | MACHING 1 |
 |  |  |
| MACHING 2 | MACHING 3 | MACHING 4 |
 |  |  |
Company Advantage
For more than ten years, our company has specialized in the
research and development and production of PCB and FPC
electroplating equipment, electric heaters, cold heat exchangers,
and coating on the surface of electroplating equipment. We have
collected advanced technologies and processes at home and abroad
for many years. With the practice and experience in the PCB
industry, the quality, stability and reliability of the products
are among the world's leading positions. Our company has passed
ISO9001: 2008 quality management system certification and CQC: CE
certification, is in line with the world, implements scientific
management, and implements international quality standards.
